SEM710PM Pressure and Temperature Transmitter (4 TO 20) mA Loop Powered
Change Currency
Can't find what you are looking for? Other options are available, please contact our sales team for advice.
Pressure and temperature transmitter. (4 to 20) mA loop powered, 0-30 BAR
- Pressure, Temperature, Process Transmitter
- Dual 4 to 20mA output
- 0-30 BAR
- User linearization output for non linear tanks
- User programmable pressure, temperature range
- Datalogging function
- USB or NFC Configuration, data download
The SEM710PM and SEM710PM/DP (with process display) are dual channel 4 to 20mA loop powered pressure and transmitter transmitters, with user configurable pressure and temperature ranges.
Both 4/20mA outputs can be programmed to
- Output pressure so the same signal can be sent to two different devices.
- Output pressure and process temperature
- Output pressure and linearised pressure for volume or level applications
The 4./20mA outputs can be programmed over any part of the pressure sensor range. For example, the 30Bar version can be programmed for 0 to 10 bar, 0 to 16 bar, 0 to 20 bar etc. Traditionally you would need one pressure sensor per range. This helps to reduce stock and lead times.
The SEM710PM/DP version can display pressure in various units, a scaled process value (custom units) and
temperature (°C or °F) on a 6-digit LCD display.
A datalogging feature is provided within the pressure transmitters via either USB or NFC (suitable Android device) connectivity. The logging function can record pressure or a scaled process value with the temperature of the medium. The SEM710PM series can continue to record time-stamp data for over 4 hours on the loss of the loop supply and resume on repower.
A 5-point calibration can be applied to the pressure sensor using the USBSpeedLink software.
Using a suitable Android device running the Status Instruments the NFCLink Config app. (download from our web site) can be used to programme both the SEM710PM and SEM710PM-DP version instead of using a PC. It can also be used to view the process values of the non display version.
